This video demonstrates how to calculate natural frequencies and mode shapes for a two-story reinforced concrete frame using matrix methods. The solution involves three key steps: (1) Formulating the stiffness matrix by applying unit displacements to each degree of freedom and calculating the resulting forces, (2) Formulating the mass matrix as a diagonal matrix with lumped masses at each floor, and (3) Solving the eigenvalue problem det(K - ω²M) = 0 to find natural frequencies, followed by solving (K - ω²M)φ = 0 to determine mode shapes. For the given example with fixed-fixed columns having stiffness K = 46.29 kN/m and floor masses m = 12,244.9 kg, the natural frequencies are ω₁ = 0.38 rad/s and ω₂ = 0.99 rad/s, with corresponding mode shapes having amplitude ratios of 6:1 and -1.68:1 respectively. Mode shapes represent the relative displacements of each mass during free vibration at their associated natural frequency.
Natural Frequencies & Mode Shapes of an MDOF Frame System
Added:hello this is uh Dr Muhammad and this is another video under dynamics of structures and still we are under the main uh title of multi-degree of Freedom systems MDF and today I'm going to talk about uh or give an example work out an example very important example on natural frequencies and mode shapes so we're going to discuss about how we can obtain natural frequencies and uh mode shapes and how we can understand what we have explained in the previous uh lecture so I think that this lecture is very important if you want to have a very good um uh like introduction to multi-degree Freedom system the previous video and this video is going to give you a very good exposure to multi-degree Freedom system in general okay let's jump now directly to the example that we are going to have for today and let's read it um uh like word by word because sometimes reading the example itself is giving to us some key important um uh understanding for the entire problem so this example is n NRC it is reinforced concrete frame as shown as you can see it here so it's um frame RC frame and it is 4 M span two floors and the height of the floor is 3 m and there is distributed load on each floor with the amount of uh 30 K per meter each and we are going to find that this um building or this Frame is having concentrated masses as we can see here on the floors okay so this is in general what this uh frame uh is all about is composed of two stories so the word two here the meaning of two it means that we are talking about two degrees of freedom system two stories okay but still maybe we are not sure now whether the masses are going to be concentrated and lumed at each floor or we are going to have some masses that is related to The Columns okay so we need to understand it from the examples each floor carries a load of 30 Kon per meter this means that it is distributed load and take care this is considered to be loading like weight for example whenever we are dealing with our problem we need to work with masses this means that there is gravitational acceleration as involved here okay inertia of columns in each story is equivalent to that of cross-section of 0.5 by.5 M this means that the whole columns okay in each story is equivalent to a cross-section of.5 by55 by5 M and as if this column and this column both of them if we are going to put them together they are going to have the equivalency in stiffness as we or if we put one column only like this and the cross-section of this column is going to have 05 by.5 uh uh uh Dimensions okay okay so now we can understand this this means that we can put our system as you can see here as you can see here okay after that assume the column to be weightless and the gers to be rigid so number one columns are going to be weightless okay columns are going to be weightless means that the columns are going to have no Mass contribution to our system so these columns are going to have no Mass contribution so the masses involved with the column it is neglected this means that we are going to uh get closer to the understanding that each floor is going to have the lumed mass and the remaining part of the system is not having mass that should be considered so assume the column to be weightless okay weightless and GDs to be rigid the meaning of girders to be rigid means that as I have mentioned before that it means that this is the girder which is very having high stiffness okay compared to the column this means that whenever the gerder is going to move laterally okay what will happen that the column is going to to have this shape this means that always the angle between the horizontal gerder and the vertical column or the uh uh this column after moving laterally it is going to be 90° this qualifies our system to be exactly sheer building sheer building and this is one of the most important condition for the shear building okay that g ERS needs to be rigid so we are reading each word in the example with great care in order to understand everything of it so okay we understood now what is the meaning of weightless and what is the meaning of to be rigid the girders to be rigid okay now let's uh see what the example needs determine the natural frequencies and the mode shapes for the frame so we have two things here or we need or the example requires two things first the natural frequencies and number two the mode shapes of the frame okay and take uh young models of concrete to be 20,000 MEAP Pascal this is given in the example okay so up till now I think that it's okay no problem at all for us and we can go uh to the next part which is related to the solution itself and see how we are going to solve our um problem first of all we need to think about some issues here as I have mentioned before first of all regarding the column it is weightless this means that only floor masses are considered and we are talking or we are going to consider lumed mass and as we said gers they are rigid this means that sheer Building Concept applies okay and when we were looking to the figure of the example we have two stories right this means that we have two degrees of freedom two degrees of freedom this implies that we are having two different frequencies natural frequencies and I'm going to explain about what is the meaning of two natural frequencies here toward the end of the solution okay but now we understand that we have two degrees of freedom two coordinates that the mass can go and two coordinates that we want to uh observe or monitor or record or report the displacement on uh on the floor or on this Frame add these two different degrees of freedom or add these different coordinates and number two is mode shapes are two so we have two mod shapes okay as we're going to see we are going to have two mod shapes one like this for example and the other one is going to be something like this as we are going to explain later so this is the meaning of two degrees of freedom two floors and also this implies that our stiffness M our stiffness Matrix and mass Matrix okay both of them they are going to be with the Dimensions 2 by two so we have two rows and two columns this is what we can get from the example uh wording okay okay now let's go next and let's go uh to see what are the steps of solution for us what are the steps of solution for us first of all we need to remember that we uh need to put strategy for the solution number one we need to obtain the stiffness Matrix and the mass Matrix so we need to put or to know what are the elements of the stiffness Matrix and the mass Matrix and after that the Second Step as we have explained in the previous video we are going to obtain the natural frequencies from the famous equation that I have explained last video if you couldn't understand this equation then please pause the video and revisit the previous video Simply we went through this derivation and we said that at the end we need to obtain the determinant of this two matrices that is being subtracted subtracted from one another the stiffness Matrix minus Omega squ time the mass Matrix equal to Z when we are going to equate this determinant with Z we are going to have a polinomial and this polinomial is going to be an Omega squared we're going to solve it uh using the quadratic equation uh law and then we are going to obtain some Roots these roots in our case we're going to find it is going to be given us two different Roots Omega 1 and Omega 2 because we have two degrees of freedom after that this is Step number two after that step number three is we need to obtain the mode shapes the mode shapes which means that what are the different shapes that our structure is going to have when it is going to be uh under motion so we're going to assume that for example it is going to move in this way other way it is going to move or other shape it is going to in this way this is what we call it the mode shapes means that what are the expected shapes or mode shapes okay that is going to be experienced by our system okay under free vibration okay it is under free vibration So based on that we need to know how much this amplitude is and how much this amplitude is right so this is let's assume this is A1 and sorry this is A2 and this is A1 one for example which is the amplitude at the second floor the amplitude at the first floor this can be we can put it like this which is A1 A2 and we say that this one is the mode shape the first mode shape which is I put it here first mode shape similarly we are going to find for this one for example it is going to be the second mode shape another way or another form of motion that we are expecting under free vibration of our system okay so at the end let's clean everything at the end we need to obtain frequencies which is going to be Omega 1 and Omega 2 and each frequency is going to have conjugate or Associated mode shape let's assume A1 A2 and here it is going to be another A1 A2 okay they are different this is Omega 1 Let's assume this is for example or uh this is the mode shape associated with uh the natural frequency Omega 1 and this is the second mode shape that is associated with the natural frequency Omega 2 okay so this is what we want to have and these are the steps of solution that we are going to follow in order to obtain the final the final natural frequencies and mode shapes okay I hope that you can understand well what are the things that we need and how we can obtain them for the mod shapes as I said this is the equation that is going to be used also I have explained it in detail in the previous video go and visit the previous video please in order to understand it from here you are going to find that the left hand side is going to be equ with the right hand side which is a vector of zero and you are going to find that different equations that is going to be uh uh we are going to find for example several equations these equations we are going to find that the they are dependent not independent means that we can find one of them is a multiple of the other and based on that we are not going to obtain A1 and A2 as absolute values rather we are going to obtain A1 and A2 as ratios so that's the issue here that we are going to have we are dealing with ratios not absolute values what is the reason for this as I said because this equation the nature of this equation that it provides for us dependent okay dependent equations the number of independent equation is one less than the the number of unknowns which are A1 and A2 in this case okay now we understood now and we can go more now okay let's go so let's go with the step one so we are having step one which is stiffness Matrix and M let's go with uh obtaining this uh stiffness Matrix and and the mass Matrix okay first of all we need to understand that story stiffness is represented as fixed fixed column this is number one whenever we are looking to our system we have like two story right and we said that we have very strong or the gers are rigid and at the bottom we found that it is the columns are fixed at bottoms right but if we get closer to one column we're going to find that the bottom is fixed and because it is attached to a very rigid gerder then we can assume that here also it is fixed so we have fixed fixed condition right this means that the stiffness of the story the story stiffness is going to be the case of fixed fixed condition which is going to be do you remember if we have a fixed fixed condition as you can see here and we have a displacement unit displacement at the top so what is going to happen here exactly there is a kind of Shear that is going to be developed Shear is going to be developed this Shear the value or the magnitude of the shear we can obtain it from the properties of the column and the end conditions so we can say that if it's fixed fixed then we have this nice equation or formula which is 12 * the material young modulus of this column times the inertia of it over the length of it so this is going to give us the story Shear again what is the meaning of the story Shear it is the sheer uh the story Shear stiffness means that it is how much force is going to be developed at the top okay of the column or bottom of the column Shear it is not flexure Shear I'm talking about Shear if we move one end one end if we move one end by a unit displacement okay then this story Shear or story stiffness both are synonyms okay whenever I say story Shear or story stiffness they are the same okay it equals 12 EI over L to the power uh 3 okay again we know e because already it's given for us right so this is 12 this is e 20,000 and we have I what is I it is the inertia of the columns here fortunately in our example they said that both columns can be represented by exactly a crosssection of 05 by.5 this means that our inertia for this cross-section is going to be 5 *.5 ^ 3 / 12 and this gives us this value which is 5.2 * 10 ^ - 3 m to ^ 4 we're talking about or we are using meter units here okay so now this is number one which is the story stiffness we could obtain it and get it from the end condition of the column at each story and the length and the inertia of the column and then when we are going to apply in our formula then we are going to obtain this I we're going to put it here and the length is going to be uh 3 m to the^ 3 here then we're going to obtain this value okay we're going to obtain this value okay what is this value is all about okay so this value is what is the meaning of this 46 6.29 we want the significance as I said many times we need to understand everything that we're doing in order to make it easy for you to understand the whole picture of what you are doing this 46.2 it is the sheer stiffness of the story it means that if I want to move this story or the gerder if I want to move it by unit displacement equal to 1 m then I need force equal to 4629 K this is the meaning of 46. 29 and this is the meaning of as you can see here this is the meaning of the uh the kilon per meter this means that we need 46.2 n kilon in order to move the gerder or to move the whole story by one unit okay that's the meaning of it okay up till now we we understand now I think that we understand what is what we are talking about okay now let's go and see the next part which is the masses in uh and floors so here we have the mass okay on each floor will be it is going to be Mass which is m equals to weight over the gravitational acceleration the weight is already given for for us because we have 30 K per meter Time 4 which is the span of the of the floor over 9.81 which is the gravitational acceleration meter per second squar okay if you substitute here are going to find that our mass is this value 122 4.9 what is the meaning of this this means that we are going to have the masses okay is going to be Lum mass at each floor okay with this value so we have the values of the masses as we can have here okay and this is in kilogram Mass we're talking about kilogram Mass which means that Newton Second squar over M or over meter okay so now the end of this part which is going to be the end of the first step in our solution is going to be related to the items that we're going to use in the stiffness Matrix and M mat Mass Matrix so the story stiffness which is K story it is going to be 46.2 n and the mass per story is going to be this value okay uh 12,24 44.9 kilogram mass and this is kilon per meter then let's go and form our stiffness Matrix so let's go and form the stiffness Matrix k k of the entire frame here we are just talking about what exactly Story one story but we have two stories here okay this means that we need to form the stiffness Matrix of the entire frame okay so take care of this word entire frame so the stiffness Matrix can be determined by applying a unit displacement to each story in succession and evaluating story forces what is the meaning of this okay we're going to read it again let's move this okay so I want to read it again it can be determined by applying a unit displacement unit displacement take care unit displacement to each story in succession and evaluating story of forces so the meaning here is going to be given in the next slide here if you look here I put now we can generalize or put our system the frame to be like two degrees of freedom as you can see here and as you can see here okay so in this case here we are going to apply a unit displacement applying unit displacement at the top here at floor two okay so this is unit displacement here as if that we are moving this point moving in this direction Delta equal to one one anything one unit okay and then we're going to see what are the forces that is going to be developed okay what are the forces the word forces here means that story Shear or story Force they are synonyms they are they are representing the same significance okay so whenever that we apply the displacement here we're going to have forces to be developed at the top and the bottom at the first floor or at the first coordinate here which is one here floor number one and we're going to have forces that is going to be developed at floor two in a similar fashion if we are going to apply a unit displacement at the first floor then we're going to find that there are forces or story forces or story shears are going to be developed the first one is going to be developed at the first story as I can or as you can see it here in green color and also there is another one that is going to be developed at the top s which is the second floor okay okay now let's go and see what is these kind of uh designation of factors that I have put here that is K12 K22 k21 k11 what is the meaning of this if you look here you're going to understand it whenever that I have k k means story Shear okay story Shear or story Force One to means that one the first subscript here means stiffness means that I can't put it like this Force this means that Force the first subscript means Force the force that is going to be developed in this direction which is what direction One in Direction one how many direction or coordinates that we have in our case we have coordinate one and we have coordinate two right so this is floor one floor two degree of Freedom one degree of Freedom two okay coordinate one coordinate 2 they are the same so one means that the force that is going to be developed or the stiffness that is going to be developed in this direction or in this coordinate due to due to unit displacement in this coordinate and this coordinate okay so whenever I say K12 it means the stiffness or the force that is going to be developed in coordinate one due to unit displacement that is going to be applied in coordinate 2 okay that's the meaning here so what if I say that it is k11 what is the meaning of it it means the force or the stiffness that is going to be developed in coordinate one due to unit displacement applied in coordinate one to okay similar K2 1 the same okay stiff that is going to be developed in coordinate 2 due to unit displacement that is going to be developed in coordinate one okay now in this case we are going to put what if we have like three four coordinate this means that we are going to start to put the unit displacement here and see what are the forces that is going to be developed in other degrees of freedom and then we're going to make a unit displacement in the second coordinate and see what are the forces that is going to be developed and the other degrees of freedom and so on and so forth for all the all of them okay okay I hope that you can understand what I'm saying up till now and I hope that it goes well with you okay now this is going to give us a very good exposure to what we should or how we are going to form our stiffness Matrix uh first of all we understand that the stiffness Matrix is 2x two because we have two degrees of freedom right so we are going to format in this way and as you know we're going to put it based on the number of columns and so the subscripts here is going to be put as k11 which means that row number one and column number one so the first subscript uh gives or provides the row number and the second subscript gives the column number okay so K12 here k21 K22 we're going to ask me this is row and column does it have any relation with what we have explained here the answer is yes so you are going to understand it in a minute now I'm going to explain this point because it's very nice and showing to us that what is the meaning or the significance of the stiffness Matrix coefficient if you do not understand this point please pause the video and revisit the previous video I talked about stiffness Matrix or the stiffness coefficient and I mentioned about this and I mentioned about this rule okay so we going to find it in detail in the previous video okay okay then we are going to equ it k11 is going to equal 2K here and K12 is going to be minus K and k21 is going to be minus K here and K22 is going to be K you might ask me from where we got this how we can obtain 2 K and minus K and K bear with me for 2 minutes and I'm going to return back to this and you're going to understand it fully okay okay there is an important hint that is going to help us to understand this uh like this analogy that think about the applied displacement as an action and the other developed Shear forces means that the sheer stiffnesses uh as reactions okay so the meaning is here we are going to apply unit displacement at floor one right so we are going to call that k11 and this is understandable this is we understand it the force that is going to be developed and the direction of the applied displacement at the same coordinate is going to be k11 is k11 means that it is stiffness in coordinate one due to displacement in unit in coordinate one and this is the right thing the Green Arrow here means the stiffness the shear that is going to be developed at coordinate one due to unit displacement applied at coordinate one that's very nice how much this one if you look here how how much this k11 from your own point of view let's assume that the right hand side is going to be positive left hand side or if it's going to the right it is positive going to the lift or directing to the lift it is negative can you consider that we are making displacement one displacement at coordinate one how many columns are resisting this displacement exactly the top column and the bottom column then the sheer stiffness that we have explained before or obtained before that is going to be resisting this displacement is going to be two two of them and because we have the top floor and the first floor they are having the same Shear stiffness this means that k11 is going to be K of the first story plus K of the Second Story which means that 2K right look here this is 2K and this is right k11 is 2K they are or the displacement at coordinate one is going to induce resisting Force that equals to the sheer stiffness from the bottom column plus the sheer stiffness from the top colum which is going to be K1 + K K1 plus K2 floor 1 and floor 2 but actually in our case floor 1 and floor 2 they are the same so it is 2K here that's the meaning of k11 equals 2 2K okay now let's go to this point here again we want to know what is the sheer force that is going to be developed at the second floor due to the application of unit displacement at the first floor right we're going to call it k21 right stiffness at Floor 2 or coordinate 2 due to unit displacement at coordinate one what do you think about this exactly it is going to be resistance of one column only so it is going to be only 1 K which is the K of the second floor and it is going to be in this direction which is the lift Direction and here comes the importance of the hint that I have mentioned to you think about the applied displacement as an action so as if there is an action here so k11 is going to be positive it is going to be positive however K12 it is k21 is going to be like as if it is like resisting it is we need to have like resistance here okay we have we we need to have resistance so here here for example we need to have another like k for example so we have K here K here and we have like 2 K here okay then this is going to be one of like the reaction that is going to be developed and based on that it is going to be K and the uh sign is going to be minus because we said this is going to be minus I want to clear up everything here so here k21 is going to be K because of the direction of the arrow as we can see as I said if this is K22 which equals to 2K it would have two resistance one from the top and another one from the bottom that we do not care about it but it equals K also okay so in this case we are going to find k21 to be K magnitude and minus with sign so k21 is going to be K in magnitude and sign okay now let's go to the next part we finished now this uh the displacement at coordinate one let's go to the displacement applying displacement at coordinate 2 so we're going to apply this uh displacement here it is unit displacement Delta equal 1 applied unit displacement at coordinate 2 then as we said in the direction of displacement assume that the stiffness here is going to be as action is going to be K22 right K2 stiffness at coordinate 2 due to displacement at unit 2 so here how many what is the resistance here it is the resistance of one column only right the resistance of one column so in this case we are we are going to have the uh K22 equal to K and what is the sign of it is going to be positive so K22 is going to be K and as you can see here it is positive okay okay now let's go to the next part which is related to what is the stiffness that is going to be developed here it is going to be K12 which means that the stiffness at coordinate one due to displacement at coordinate 2 from here from as you can see from equilibrium we need to have the green the green arrow at coordinate one to be in this direction which is negative Direction I mean that uh directing to the left this means that q1 2 q1 2 should equal to exactly negative because it is directing or heading to the lift and the magnitude is going to be K okay did you understand this I'm I'm sure that it is might be might be difficult to some extent but if you look deeper you're going to find it clearly simple very simple okay just if you couldn't understand it pause the video and repeat or like repeat what I have said uh again or listen to what I have said again and you're going to find it pretty easy this very simple concept that I am explaining here if you could understand it in this example you can apply it in any different type of multi-degree Freedom system whether it is three four or more because they are applying the same concept exactly exactly so if you could understand what I'm saying now this means that you have understood the multi-degree freedom system how the stiffness Matrix works okay or formulated okay that's very good let's go to the next part which is related to the mass Matrix now still we are under the first step which is related to the mass Matrix and stiffness Matrix okay now as you can see the mass Matrix it is 2x2 mass and it's actually simple to be formulated because we have said that before in the previous video it is diagonal Matrix okay means that the off diagonal elements are zero so it is easy for us and we know m m already it is known for us because we have calculated it before okay now let's go and understand more about the formulation of the equation of motion okay this is only like something redundant no need for us to make this because if we have formulated the stiffness Matrix in the previous slide I have done it and we have the mass Matrix as we have to end it here then it's okay we can go directly and work but I want you to know that this formed stiffness Matrix and mass Matrix they are representative of the equation of motions the equation of motion that we need to formulate so now it is as I said no need to make this a a step but it's only for your understanding so now we are going to put our Mass which is here this is the mass one here it is mass two because as I said we have like two masses they are this is M1 M2 and we said that we can formulate it to be mathematical model and then free body diagram please revisit the previous video to understand what is the meaning of mathematical model and what is the meaning of the free body diagram for each mass now I'm putting the free body diagram of each Mass the first mass is going to the first mass is going to have uh inertia forces okay is going to have inertia forces which is M1 U1 double dot and there is some resistance here which is k1 U1 elastic resistance and between the two the mass one and Mass 2 is going to have K2 * U2 - U1 and in the same time we're going to have for Mass 2 we have the inertia forces right we have the inertia forces which is M2 * U2 double dot then if we're going to apply the equation of motion for the first mass we can put it like M1 U1 double dot plus the resistance which is going to be K1 U1 minus K2 this is the force here K2 * U2 - U1 equal to zero it should be in under equilibrium this is the equation of motion for Mass 1 for Mass 2 we have only two forces being applied there M2 U2 double dot + K2 * U2 - U1 equal to 0 and this is the equation of motion for M2 right so this is what we are having here okay okay so in this case we are going to uh arrange this equation of motion we're going to arrange this equation of motion for each uh Mass we're going to put them in a matrix form so we're going to put it in a matrix form we're going to put it in a matrix form so in a matrix form we need to put equations so the first equation the first draw in this Matrix stiffness Matrix times U1 and U2 which is the vector here right it is going to give us the equation of motion so in this case so in a matrix form what I mean here that we have we have like in Matrix form we need to have the mass Matrix we need to have the stiffness Matrix and the uh Vector of displacement and the zero Vector here so we are going to have for Mass Matrix okay we need to have it something like this M1 0 0 and M2 here and this is actually M1 and M2 they are the same M so there is no equal here this is only I'm putting the stiffness or we can say the Matrix form of the stiffness and this is the displacement Vector this is the zero Vector okay which is the vector of zero and this is the mass okay Mass Matrix that we are needing it and this this is the first part of the equation the first or the first step in the strategy of our solution okay so we determined now or we have now K Matrix we have or we are waiting for the U vctor which is the displacement we have the zero which is considered to be like the forces being applied in the system we have zero and we have the Matrix of masses or mass Matrix which is going to these matrices and vectors are going to provide for us the uh the second step in our solution which is going to be related to the determinant and obtaining the frequencies as we are going to see uh shortly okay now let's go and see the second step step okay the Second Step here is related as I said to obtaining Omega 1 and Omega 2 the natural frequencies of our system the natural frequencies of our system we are going to find that the determinant of the stiffness Matrix minus Omega Square time Mass Matrix should equal to zero from where we got this please revisit the previous video okay this means that the determinant here okay the determinant here is going to be K which is the stiffness Matrix minus Omega squ still here we are using Omega without Omega 1 or Omega 2 it is only Omega Omega squar because after that we are going to solve it to get Omega 1 and Omega 2 as the roots of the polinomial or the quadratic equation but anyway the time being we are dealing with Omega only so we have here stiffness Matrix we have here Omega squar we have here the mass Matrix we have the mass Matrix then we're going to give or provide the determinant the determinant is going to be generally 2K first item here is going to be 2 K minus Omega 2 m and this element is going to be minus minus k and this element here is going to be minus K as well because Omega squ is multiplied by zero and here this element is going to be K minus Omega 2 m okay the determinant of this Matrix is going to be obtained by multiplication of the diagonals subtracting the diagonals multiplication so we're going to have 2 K minus Omega 2 m * K minus Omega 2 m okay this diagonal minus minus K to ^ 2 okay if we're going to rearrange it then you're going to find that you have a quadratic equation in Omega squared quadratic equation in Omega squar take care it's not in Omega it is in Omega squared so we are having like m^ 2 * Omega 2 to the power 2 - 3 km * Omega 2 + K to the^ 2 okay equal to zero okay equal to zero if you look to here this is the left hand side equal to zero and this is considered to be a quadratic equation quadratic equation okay so this quadratic equation in Omega squar we can solve it we can solve it let's see how we can solve okay so we can solve it as you can see using the law or the quad quadratic equation uh uh uh solving uh which is the law of uh solution X1 and X2 equal to minus B plus or minus Square < TK of b^2 - 4 a c over 2 a and you know of course what is a b and uh and C it is related to the coefficient of the uh Omega uh Square to the^ two and Omega squared only and the absolute the absolute uh term okay so I think that you are familiar with this better than me and you understand it very well based on that if we're going to solve our equation you are going to find that we have omega 1 and Omega 2 The Roots so Omega squar is going to have omega 1 and Omega 2 now we have two Roots because we have two degre of Freedom we are going to have two different Roots the first root is 038 red per second and the second is going to be 0099 red per second okay so these are the two roots and they are the natural frequencies okay natural frequencies of what they are natural frequencies of the mode shapes that I'm going to get in the next step okay do you remember when I was saying that we have different ways okay of representing the shapes of the system so this system is going to work with or this mod shape is going to displaced with this Omega it will go back and forth with Omega I'm going to talk about this in detail uh toward the end of the presentation okay and Omega 2 is going to be with the second mode shape which is for example is going to be something like like this okay so our mode shape is going to be associated with Omega 2 and we are going to have this kind of uh frequency of it okay okay now this is the second step and we now obtained Omega 1 and Omega 2 let's go to the third step and our strategy of the solution okay let's go to the third step okay step number three is going to be related to the mode shape is going to be related to mode shapes related to mode shapes and remember last video we were talking about this equation from this equation we can obtain or get the ratios of the mode shapes that we have we have two mode shapes right we have two mode shapes A1 and A2 okay every one of it is going to have like A1 and A2 right amplitude for the first floor amplitude at the second floor okay so that's the the issue here when we look to the mode shape equation here we as we have explained in the previous video we derived this equation and we understood well what is this equation is all about so it is going to be the Matrix of the stiffness Matrix time Omega squ M times the mode shape which is a the amplitude Vector equals to the zero Vector here okay the problem is this equation we have omega here right but Omega we have actually two types of Omega we have omega 1 and we have Omega 2 right so we are going to repeat the solution of this equation two times or we are going to sub substitute with Omega 1 and Omega 2 in this equation and we are going to obtain two different a so a is going to be A1 A2 which is going to be associated with Omega 1 and we are going to have also another A1 and A2 okay they're totally different but associated with Omega 2 so we're going to have two different mode shapes two different mode shapes why because we have two different frequencies when we substitute in this equation we're going to find that we have two different mode shapes from here okay so based on that let's go and use the first root which is Omega 1 and substitute in this equation okay and substitute in this equation we have 2 K - Omega 1^ 2 m this is is in the first term here if you put or if you are going to put this equation you're going to find after substitution that you are having this is a matrix okay this this is a matrix okay and this Matrix because this is is minus so this Matrix is going to be multiplied by this vector and then they should equal to this Vector right so here we have like 2 by two here it is going 2 by one this means that we are having here two rows by one column right okay so in this way we're going to put K minus Omega 2 m one time we put it Omega 1 another time we put it Omega 2 now let's go with Omega 1 so the first term here is going to be 2K minus Omega 1^ 2 m and here it is going to be minus K remember that m is diagonal matrix so we have of diagonals are zeros so we are having minus K here similarly for this coefficient is going to be minus K and for the last one here it is going to be K minus Omega 1^ 2 m multiplied by a which is going to be A1 and A2 remember that it is s associated with Omega 1 in this case equal to the right hand side is going to be zero okay we know everything here okay numerically we know K we know Omega 1 We Know M everything is known okay from the previous slides so we know K we know Omega 1 We Know M which is the masses okay the mass of uh the floors Omega one natural frequency associated with the first modood K which is the story Shear story stiffness everything is known so we can obtain these terms easily in The Matrix right it is going to be numerically going to be like this please verify these numbers okay by yourself you can check it if there is any mistake please comment on the video if there is anything not right here okay and after that we are going to equate it it is going to be multiplied by by A1 and A2 right and equal to zero then we're going to use these to obtain the equation so we're going to obtain or multiply 74.9 * A1 - 4629 * A2 and it equals to 0er right similarly also for the second draw here - 4629 * A1 + 28.6 * A2 equal to 0 these are two equations right that's very true and let's see how it will work for us when we are going to work for this we're going to find the first equation is 7 24.95 * A1 minus 46.2 n * A2 it's 1 * A2 equal to Zer right okay similarly for the second row here we're going to have this look to this equation without anything just look to these two equations I want you to look to these equations do you think that there's something unique about them I guess yes there is something here try to multiply the second equation by 1.6 for example and let us see what will happen you're going to find that if you multiply the second equation by minus 1.6 it would give you the first equation this is the meaning of dependent equations or coupled equation means that actually they are not two equations they are one equation but repeated with different factors okay multiplication so I can for example I can say there is another if I want to like confuse you I'm going to say that with we have another three uh another third equation I'm going to multiply equation number two by two so it is something here time A1 Plus another thing * A2 equal to Z and I'm going to claim this is the third equation actually it is not a third equation this is only a multiplication of one of the equations so it does not work for us it will not add anything for me this is what we call it that the number of equations number of equations 1 2 is okay is less the real number of equation we call it independent independent okay independent means that independent equations they are dependent equation here so the number of independent equations is one less than the number of unknowns how many unknowns do we have here A1 and A2 so this means that the number of unknowns to which is A1 and A2 the number of independent take care of this independent equation is one not two okay because as I said if you multiply here by 1.6 it would give you the first equation so it is not an equation actually the second equation is not an equation it's a repetition of the first equation okay so this makes a problem for us what is the problem that the problem is that we cannot obtain A1 and A2 in terms of absolute values we are going to obtain ratio between A1 and A2 that's the maximum that we can obtain okay okay so based on that we're going to deal with the situation here and we're going to claim well if this is the case then we're going to say this means this is um this is just to note here this means that the equations the equations are dependent on one another for example one equation is a multiple of the other uh of the other in our case equation 1 equals 2 minus 1.6 equation 2 you can check it by yourself if you want okay so this makes the absolute values of the unknowns cannot be obtained okay the absolute values cannot be obtained because we have as we said the number of equations are one less than the number of unknowns only the ratio isue that is going to be obtained can be obtained A1 over A2 so we can choose any one any equation and from here we can obtain the ratio A1 over A2 it is going to be for example here it is going to be uh 46.
29 over 7495 and this would equal 6 which means that it is the ratio of 6 over 1 as if A1 is 6 and A2 is 1 okay so we can obtain only the ratio from these gr two equations we can obtain the ratio okay you understand up till now I hope that everything is clear for you and I hope that you can get through what I'm saying easily this means that the first mode shape the first mode shape ratio is A1 over A2 equals 2.6 over 1 this is the graphical representation of first mode this means that if we assume that A2 which is the amplitude of displacement at the second floor is going to be one this means that the amplitude of the first floor is going to be 6 and the mode shape of the first mode shape which is related with Omega 1 okay we call it the first one the first here always related with the um with the least uh frequency okay this was the least frequency we call it the first which is associated with the longest period okay so we have here 6 and one this is what we call it the first mode shape the first mode or the first normal mode it is going to be 6 and one so if you are going to ask me does it mean that A1 equal to 6 and A2 equal to 1 the answer is no so they are A1 does not equal 6 A2 does not equal to 1 it is the ratio this means that A1 could be 1.2 and A2 could be two okay it is the ratio between the two it does not mean the the value itself okay so that's the the meaning that we need to bear in our mind regarding this issue okay okay so now let's go to the next part which is related to the application of the application of Omega 2 and repeating repeat uh repeating the same procedure again so here we are having uh the second the second root which is Omega 2 we're going to follow the same the same uh the same way that we have uh used before so we're going to put the same 2 K minus Omega 2 here okay squ M and here it is K minus Omega 2 okay squar M and minus K and minus K the same A1 and A2 they are associated with W or Omega 2 this means that they are different this is the mode shapes for Omega 2 equal to zero in a similar fashion we are going to obtain the numerical values okay and then we're going to have the same coupled equation dependent equation so the same applies here and we are going to obtain one equation only in this case I only used one equation here so we have A1 here A2 here and these are the terms or the numerical values associated with A1 and A2 and I found that A1 over A2 equal to minus 1.68 it means that as if the ratio between A1 to A2 as if it equals to - 1.68 as A1 equal to - 1.68 as you can can see here and A2 equals to 1 take care of the value here and the minus so if we say that going to the right is positive and going to the left is negative this is the sign convention so if we say that A1 sorry this is yes this is this is A1 yes that's right so if A1 equals to minus 1.68 this means that it is going to be to the left by 1.68 and A2 which is one it is going to be the right so the dform shape is going to be like as you can see here okay as you can see see here they are different than the first mode okay if you want to recall what we have in the first mode this is the first mode and this is the second one they are totally different okay here the two masses are going into the same direction which is the positive direction for example however here in our case it is not we have the one Mass one Mass going to the right another mass is going to the left because we have minus here the ratio is including minus okay so the minus is important and the ratio for the mode shapes if we have minus means that the masses are going to be opposite to one another they are going to go in different direction this means that the mass is going to go to the uh right if we're talking about the second floor while that the first floor is going to the left there is something like this so it is the structure is going to have something like this okay okay so I hope that we can understand up till now and then let's go with the second mod shape so now our second mode shape is going to be minus 1.68 and 1 again if I ask you this means that A1 equals to this value and A2 equal to this value the answer is no it is only the ratio okay is the only the ratio now we can conclude with that here we have first mode shape the first mode shape is 6 and 1 with Omega 1 equal to 038 remember this is 1 Omega 1 the least value of omegas it is less than Omega 2 which is 099 okay because this is we call it the natural frequency or the first natural frequency circular frequency okay and the corresponding T1 which is the T here the natural period that is going to be taken in order for this mod shape to like go in this direction and go back to the uh neutral position and then go to the uh um the opposite direction T is going to be with this time it's very large here but anyway this is how the numbers uh uh uh like go with us or went with us okay okay so this is the shape of the mode shape here okay coordinate 1 6 coordinate to one this is the ratio okay this is the first mode associated with with it and for the second mode we are having this is the second mode here which is minus 1.63 as you can see to the left and one which is going to be to the right and Omega 2 this is the value of it T2 it is 63.4 seconds and the second mode shape here as we said it is going to be uh minus 1.63 I think a three here and one okay understood I hope that everything is clear for us we are about to finish so do not worry uh and bear with me for the remaining part okay okay now let's go now to the notes about the example so that we are going to understand more about what we have explained here first of all I want to give definition for the mode shape I want to give a definition for the mode shape so the mode shape definition can be defined as the possible the possible simple harmonic motions of the structures of the structure which can take place in such a way that all masses take care of this word all masses move in Phase take care of this word n phase in the same frequency either Omega 1 or Omega 2 okay take care of some key wordss here we're talking about simple harmonic motion we're talking about all masses we are talking about in phase okay three main Concepts in the definition I want you to remember them well in this definition simple harmonic all masses and phase these are the three key words here well how we can represent this graphically so we can go here let's go with the mod shape number one in mode shape number one as you can see so if we say that this is how the motion is going to be represented okay it is a simple harmonic motion the horizontal line represents T the vertical line represents U of T which is the dynamic response at any time okay if we start at point one which is zero initial condition What would will happen what will happen our system this is the0 one our system was in the equilibrium position when it goes to 0 2 okay then it is going to the right with the values that we have explained before 6 and one right it was 6 here as far as I remember and one here and then when it goes to 3 so starts with 0.1 then go to 0 2 so it is going to be like this and then from point 2 it is going back to position three this is position three three it is going to be equilibrium yes that's right no response it is zero so here this is no response equilibrium position and then in the same time it is going to after that to point4 from three it goes to 04 this is0 4 it is going to to the left 6 coordinate 1 one at coordinate 2 right so from three it goes to four 4 the maximum this is the maximum and then it will go back again to the equilibrium position five from four it goes to five this is considered to be complete cycle T1 this is T1 so we are going to be here again equilibrium position so we are going to back again to five so the system is going to be stand still again okay this is the mold shape number one with the frequency that we were talking about Omega 1 so this shape is going to be repeated over and over again under and it takes time T1 in this case Okay important note here is both floors reach their maximum displacement at the same time and pass through the equilibrium position at the same time this means what if the system this is the masses here okay they are going to reach here and here in the same time this is one for example this is 6 right but this would be faster than this to reach at the same time of the other uh Mass if this is mass one and mass two so in the same time after for example here let's assume this is for example 0.1 second for example okay so after 0.1 second Mass one would be here Mass 2 would be here in the same time and then when they are going back to the maximum amplitude to the left they are going to pass through the equilibrium position in the same time okay so that's very important concept and this is an important hint here because they are working under what the same circular frequency natural frequency okay that's an important issue for the modee shape for the mode shape okay okay now let's go to the mode shape number two okay this is mode shape number two so what will happen here again T versus U of T and we have 1 2 3 4 5 and the complete cycle it takes time T2 which is related to the the natural frequency Omega 2 and these are the points 1 2 3 4 and 5 right it is similar to what we have explained before in one there is nothing this is equilibrium position this is zero number two it is going to be as we said here it is minus 1.68 here it is going to be one right and then we are going to 3 so we're going to3 here which is equilibrium position that's right we do not have any displacement here or the dynamic response is going to be zero right and after that from 3 to four from three to four we are going to have the maximum amplitude at the opposite side here it is going to be 1.68 here it is going to be minus point or minus one I mean that the amplitude is the same maximum but in different directions and then from four it going to five again so we're going to have the equilibrium position again okay so this is as you can see here these are the masses they are moving in the same time they are reaching the maximum amplitude at the same time and passing through the equilibrium position in the same time okay so this is the meaning of the frequency quency and the representation of the frequencies okay and after that we are having another hint uh for the example the first mode is associated with the lowest Omega and this is right okay or maximum T so this is what we call it the maximum the maximum t or the lowest Omega circular frequency the other modes called higher mode shapes so like we have omega 1 this is the natural circular frequency Omega 2 or Omega 3 or Omega 4 if we have more degrees of freedom we call them higher mode effect or higher mode shapes okay uh the next hint is related to the dynamic characteristics depend on only on mass and stiffness this means that no damping why if I if I ask you why we do not have damping here because as we said before damping is going to have negligible effect on buildings as we mentioned and they are not going to change the uh natural or dynamic characteristics okay so mass and stiffness they are having the greatest effect okay unless that we have additional or uh additional damping or something this is might change uh the the effects but in General the natural Dynamic characteristics of any building if we're talking about buildings contribution of daming is minimal okay okay and then I'm going to give some examples here related to the I'm going to give some examples related to the mode shapes okay this is you can find it in humor book chapter 10 just the what but the the representation is very nice actually so I decided to show it to you uh here so as you can see we have like two floors okay regardless of the masses here masses is doubled here we have U1 and U2 then we have as I was uh explaining 1 2 3 4 five and it is explained here for each floor so for floor one this is the dynamic response based on U1 we have 1 2 3 4 as you can see that we have a complete cycle here starting from one k maximum going to two a little bit less than three no response which is neutral position and then four and five it is going to be repeated in the other direction as we can see this is going to be this uh this circle uh we call this circle the rot ating Vector representation it is the maximum amplitude here because the amplitude of U2 is higher than U1 so it has like uh Vector representation here the diameter of the circle here is small and the diameter here is larger why because we have here this is the amplitude the maxim amplitude which is the diameter here for U2 which is the top floor or the second floor here the amplitude is small then the diameter of this circle is small okay and as you can see it is T here okay and another nice one which is the opposite or we can say that it is the response of two story frame in the second mode so this is the second mode similar to us also it is like one two this is one and this is a little bit too this is one 2 3 four after that three it is the neutral position which is three here and then four and five it is the opposite of it in the opposite direction and then repeat again the same repeat again and so on so we have this for U1 and this is going to be for uh u 2 okay that's the how the displacement is going to be uh this is the frame this is the displaced shape as we said of the columns for example this is the rotating Vector representation and here we have the displacement time history we call the displacement time history okay and the last one maybe we have if we have like two degrees of freedom this is a case a very nice case where that we are having response of two story frame subject to a arbitrary initial condition arbitrary initial condition it seems that the initial condition here at zero time t equal to0 it was like shifted as you can see here this is one here which is the initial condition then the structure is going to respond based on the initial conditions here and we are going to find that also this is two for example which is this point and then this is three here which is this point and then four we cannot get where exactly zero because it will not get through this uh equilibrium position exactly but anyway four and five they are uh represented here and this displaced shape of the column and this is the displacement or the time history displacement time history the next one and maybe the last one it is the Three Degree Freedom just to let you see the meaning of this if we have three degree Freedom the same the same story that we have mentioned before it is it is going to apply here this is the mode shapes of three story Shear frame this is the frame itself this is the first mode the first mode always all all uh masses all the all masses are going into the same direction so here this is the mass here here they are going into the same direction okay however for the second and third you're going to find that some masses some masses they are going into One Direction other masses they are like going to different Direction this means that the masses they are as if they are canceling one another this is why always you're going to find the first mode is going to contribute to the mode the total shape of the structure under motion why because all masses are going to be in the same direction so this is this makes the modal participating Mass ratio to be higher or the highest for the first mode here you're going to find some masses right other left some right other left and so on so they're going to cancel one another and the total contribution of this mode shape is going to be less uh less than the first mode shape this brings us to the end of this video thank you very much and it is very important example that is going to give you a very good explanation for multi-degree Freedom system please pause the video at any time and try to think about every explanation that I have said and uh thank you and see you you in the next video
Up Next

Damped Free Vibration of Structures: Viscous Damping Theory
@IITKanpurNPTEL
23.4K views•2019-08-26

Earthquake Resonance: Building Seismic Response Model (Resonance 3)
@IRISEarthquakeScience
17.5K views•2009-11-09

Polymer Environmental Degradation: Mechanisms & Stabilization
@iit
1.8K views•2012-07-10

How a Student's Question Saved a NYC Skyscraper from Collapse
@veritasium
22.8M views•2025-04-26
Related Study Plans & Knowledge Roadmaps
Structured learning paths in Engineering







































